- Mon - Sat: 8:00 - 18:00
Lewisville
5-Star Epoxy Flooring of Lewisville
Phone us today for trusted home, business, and industrial epoxy coating services.
Epoxy Floor Finishing Specialists in Lewisville, Oregon
Epoxy floor covering is quickly emerging as a popular method for giving protection to concrete floor surfaces.
A resilient, low-maintenance coating that can be put on over lots of surface areas, it is easy to see why it has emerged as so well-liked.
As a matter of fact, epoxy is rapidly emerging as the most prevalent method for covering concrete in lots of domestic and industrial environments. Let’s take a look at a few of the advantages of epoxy floor surface coating.
To start with, epoxy floor surface coating is excellent for giving protection to your floor surface against stains and spills. Regardless if it’s from coffee drinks, soda, or some other liquid, spills are frequently challenging to get rid of.
If they aren’t gotten rid of immediately, then they can easily permeate into the underlying concrete providing you a challenging issue.
If you have an epoxy coating on your concrete, then stains can be easily gotten rid of by merely sweeping off the area with a brush.
Yet another benefit of epoxy floor surface coating is that it is non-scratch, dent, and chip resistant. No more damaged tiles or sharp edges.
If a spill happens, just clean up the excess liquid quickly and the area will be brought back to its true appearance.
The epoxy sealant also provides a degree of defense from sun rays. Sunlight can be exceptionally damaging to painted and stained concrete.
Lewisville Epoxy Floor Coating Service
The various advantages of epoxy floor covering:
There are lots of advantages to epoxy floor surface coating. If you are thinking about an epoxy application, then there is no better method to make sure that you get the best outcome achievable.
Our qualified epoxy specialists will be able to provide advice on which kinds of resins are best for your specific circumstance, and this advice should be 2nd only to the quality of the resins.
With appropriate preparation, a good coating can last a long period of time. There is no need to fret about water dripping in through a broken floor surface. Additionally, epoxy resins are fairly maintenance free.
Once put on, merely clean up any spills or stains, and you’ll discover no need to put on any extra products to ensure their resilience.
The advantages of epoxy finishes don’t stop there. They can also reduce sound transmission through floor surfaces. The shield produced by the coating can actually contribute to the sound reduction by making it tougher for them to go through the concrete.
This has the added benefit of making noise dampening equipment like radon counters or sump pumps more reliable. These added advantages come at a slightly greater expense, but the results far outweigh the extra expense.
The advantages of epoxy floor surface coating can go even farther than lowering sound and heat energy transmission. If you are attempting to sell off your house or lease a house, the coating can also help to make your residential or commercial property more energy efficient.
Less heat energy and less sound mean less electricity bills and less frustration when attempting to sleep at night. The coating not just offers protection to your floor surface from dirt, but also from insects.
The advantages of epoxy floor surface coating don’t stop there. If correctly put on, they can also create a non-slip surface area, make your house more secure, and improve the appearance of your house..
With such advantages as these, it’s easy to see why epoxy is emerging as such a prominent floor surface covering option. Now is the right time to get more information about the procedure of applying an epoxy floor surface coating to help you decide if this is the suitable option for you.
The first thing we do before we begin any epoxy floor surface coating task is to get rid of any existing flooring and coverings. This consists of moldings, insulation, and caulk. Often times we might utilize a rigid bristled polisher or a power washer to get rid of the old coating and allow it to air dry..
It is very important that we allow adequate time for the existing coating to totally dry before applying the brand-new one.
Thereafter, you will have to select an epoxy floor surface coating set that will give you the best results. Once you have chosen a package from us that matches your requirements the first thing our people do is put on the brand-new coating.
There are two different ways to put on an epoxy floor surface coating. One method is to spray it on and allow it to set overnight, then paint over it; the other method is to simply put on it by hand.
Epoxy floor covering is highly advantageous in domestic and industrial properties. Phone our Lewisville epoxy flooring specialists right now for any sort of questions you have on epoxy coating.
EPOXY FLOOR COATING
If you are thinking about epoxy floor covering, you will really want to check this out. You will discover 5 ways how epoxy floor covering makes your daily living easy..
This type of floor covering is a solid protective coating that will conserve you cash, time, and energy on maintenance. The expense and hard work previously were enormous.
Now, with just a couple of fundamental methods and a little investigation, you can install a great epoxy floor covering solution for a reasonable cost.
When you take a look at epoxy floor covering finishes, you will observe the vast array of options readily available. There are lots of advantages to selecting this type of floor covering..
For instance, if you have an outdated, scratched, or discolored floor surface, you will discover that the resins can help to revitalize and offer protection to your floor surface..
This type of floor covering is also really unique due to the fact that it is made up of tiny beads and resins that mesh to create a solid, smooth floor surface.
An additional reason that epoxy floor covering is so appealing is that it is really easy to put on. Our expert installers can have the task completed in a timely manner and efficiently.
When you consider the maintenance of epoxy floor covering, you will understand that it is quite easy to keep it looking excellent..
Because you can seal the bead together, you won’t have to fret about moisture getting between the sealant and the surface area. If there is any water, the sealant will secure it together up until it dries out..
You can even utilize the sealant to offer protection to the floor surface against spills from containers or food products. It is also easy to clean up if a spill happens, due to the fact that you do not have to clean off the dirt with a sponge.
If you wish to know how epoxy floor covering makes your house more valuable, then you should consider sealing your floor surfaces..
When you seal the surface areas, you will discover that they are a lot more long lasting than normal surface areas. They can deal with a lot more abuse than normal soft top floor surfaces..
This is a great financial investment, and your house will look excellent for several years to follow.
You might question why the house assessor has suggested epoxy floor covering in your basement..
The sealant will offer extra defense to your house from mold, mildew, bugs, and any other unwanted material that can trigger damage to your floor surfaces..
The sealant will protect against moisture from building up between the concrete slab and the wood beams in your basement. Minus the sealant, the wood and concrete would bloat and decay..
This means that the sealant will make your basement a lot easier to keep when compared to some other kinds of floor surfaces.
The sealant can offer a lot more defense than you think. Sealants can offer protection to your floor surface from wear and tear triggered by heat, chemicals, moisture, and so much more..
You do not have to fret about the health and well-being of your family when you utilize epoxy floor covering. The sealant does not add a degree of toxic chemicals to the air as a few other floor surface coverings do..
Epoxy finishes are non-toxic and will not trigger problems for people who are vulnerable to severe chemicals.
There is no need to spend countless dollars on a new basement floor surface when you can easily get an epoxy floor surface..
Epoxy finishes can be found in a range of color options so you can complement your house’s décor. An epoxy floor surface can be produced with a mix of different resins to give you a huge range of choices..
If you have apprehensions about how epoxy will work in your house or industrial property, consult with our crew today.
We will help you select the best possible solutions and designs for your epoxy floor covering requirements.
GARAGE FLOOR SURFACE SOLUTIONS
If you are searching for the best floor covering choices for garages, our crew will offer you with the info you require.
The garage is one of the most essential rooms in your house.
It is also among the most mistreated rooms. For that reason, it is imperative that you offer protection to this valued storeroom.
By selecting the best floor covering option possible, you can make last a long period of time without needing repair work done frequently.
The leading choices for garages are epoxy floor covering, Quikrete garage tile floor covering, and stone floor covering.
Several years of low maintenance and resilience make it a great option for lots of houses. It is immune to stains and has outstanding heat and water resistance properties.
It does not fade easily and shows off to its finest potential when set up correctly. It is easy to wash with a power washer and a cleaning agent solution. It is a perfect option for a wetness shield.
The benefit of these kinds of floor covering include the truth that they require little maintenance and can take on any climate modification..
They are also resistant to stains. This floor covering item can be found in a range of color options and patterns..
Some of the pros of rubberized tile floor covering include the truth that it is resistant to stains and heat..
It is easy to maintain, and can be found in a variety of different color schemes.
The primary drawback regarding this type of floor covering product is that it can be a bit costlier. This all depends on the style..
The advantages of epoxy sealed concrete floor covering are that it comes with a long life span, it is low maintenance and will require little to no maintenance between 6 to 10 years.
As you can see from the aforementioned info, all these kinds of floor covering are popular garage floor covering choices..
You should do your investigation and figure out which type would best accommodate your requirements. Your budget plan, the appearance of your garage, and the amount of traffic the garage endures will all impact your decision..
In the long run, you will spend less cash on epoxy garage floor covering than you will on costly repair work.
If you decide to utilize epoxy floor covering, you will require to have it sealed.
Rubber tiles are also in demand but there are some drawbacks to these floor surfaces also..
One downside of rubberized tiles is that they are easily damaged by acid-based cleaners..
Another downside of these floor surfaces is that they don’t stand up adequately to severe temperatures and humidity..
In the summertime these tiles will get hot and sticky and in the cold weather they will crack and break..
Epoxy floor surfaces on the contrary are resistant to heat, moisture, and acid and they look excellent all year long.
Our crew of epoxy flooring contractors will give you a no-cost no-obligation price! Reach us now!
Our Epoxy Finshing Projects
EPOXY FLOORING RESTORATION AND COATING
If you have observed an improvement in your floor or concrete driveway after employing an epoxy finish, you most likely also notice a change in its appearance.
This will be in regards to its color tone, its luster, and even the amount of dirt it takes on and takes off. But if you notice changes in your floor that aren’t connected to its treatment, you might have a more serious concern.
That issue is moisture content buildup underneath the epoxy. This accumulation may be due to incorrect cleaning methods. Another is a much deeper concern like structural deterioration, that can trigger your epoxy floor surface finish to flake.
The main reason this happens is due to the fact that the base product, which is generally either polyurethane or Phenolic resins, is penetrable. When it’s employed to a solid surface area like concrete, its chemical bonds weaken and it’s enabled to slowly permeate the surface area..
Once this has happened, the epoxy seeps within the pores of the concrete and bonds chemically with the concrete itself. Then water vaporizes as it reacts with the epoxy. The procedure produces a physical shield around the base of the floor that decreases any further movement.
Moisture vapor is the greatest issue with epoxy floor coverings. The chemicals bond so closely that the moisture quickly takes in into the epoxy itself. In addition, when you put on the epoxy finish to your floor, you should utilize a specific, enhanced floor scraper to eliminate it..
And due to the fact that there are so many other tiny dirt fragments, the scraper should be used thoroughly to stop the buildup from moving upward and damaging your floor.
Appropriate usage of the floor scraper can prevent your epoxy floor coverings from ending up being ineffective-and it doesn’t take a lot to make the coverings inefficient.
Appropriate Seal needed
Epoxy coverings can not correctly seal if there are too many voids in the seal. These coverings also need to permit growth and contraction during the life of the building, so any gaps in the seal are a possible issue.
Sealing pores and cracks in epoxy coverings also boosts the threat of deterioration. The greater the surface area stress of the finish, the more probable it is to deteriorate in time..
If there are big gaps in the seal, the finish won’t be as reliable in containing the rust. Of course, the bigger the surface area opening, the more damage the finish will have the ability to stop. That’s why these coverings are only used on bigger floor surfaces.
Though epoxy floor surface coverings are really long lasting, they still have some maintenance requirements. New coverings should be employed every handful of years, especially in high traffic places.
Some areas are prone to continuous traffic and requires to redo particular areas in time. This signifies that the finish might end up being brittle at the areas where it is thinnest. The brittle areas can then split and break, and all new stains and/or deterioration can then develop.
To conclude, though they are highly long lasting, they should be correctly maintained in time. They should also be correctly employed or set up. If the floor is not sealed correctly, pollutants can build-up underneath..
Newer items are helping make it much easier to install correctly, but if you notice any problems with your floor, you should call our skilled installers to make sure that the issue is dealt with before it worsens.
Our coverage area
In addition to Lewisville, we also serve Bridgeport, Monmouth, Parker, Falls City, Independence, Dallas, Buena Vista, Sidney, Lewisburg, Talbot and other communities in Polk County.
INDUSTRIAL GRADE EPOXY FOR COMMERCIAL LOCATIONS
Why select industrial-grade epoxy for your industrial property?
Because this option provides an excellent series of advantages as follows:
Boosted look: Your warehouse does not require a hip and elegant style. However, it should still look professional at the same time. Ease of maintenance and boosted appearance.
There is a popular mistaken belief among many people about epoxy floor coverings and their capability to increase the visual appeal of your space.
This mistaken belief is mostly due to the use of lots of chemicals in the concrete floor coverings. That is not the case. While many people presume epoxy floor coverings are tough and long lasting, the reality is epoxy floor coverings are also highly flexible.
With appropriate maintenance and cleaning, you can ensure their long lifespan and charm for a long time. The chemical agents in concrete floor coverings diminish slowly in time, offering an attractive surface area that remains crystal clear even after numerous years of continuous usage.
How about their resilience?
As compared to other kinds of floor options, epoxy floor coverings provide a more irreversible solution. They are also weather-resistant, which guarantees the resilience and safeness of your facility.
Their high degree of resilience and safeness is enabled by employing just the best chemical mixture which effectively seals the surface area while contributing to its stability.
On the other hand, epoxy floor coverings are environment-friendly. They don’t contribute to the already-overloaded environmental pollution and therefore help reduce the negative influence on the earth.
This consequently helps to maintain and sustain the natural resources for a much longer time. If this procedure is correctly managed, it can considerably reduce the negative influence on the earth. When used correctly, they can make your building much more energy efficient.
Why should you consider epoxy floor options?
The most obvious benefit is the long-term savings you can obtain from utilizing epoxy floor coverings. Most people just consider the initial installation expenses when conducting an improvement.
The genuine expense, you’ll face down the road will be the fading of the floorings and other associated problems. When you utilize epoxy, you can cut down your total expenses up by almost 50%.
The other common benefit of using this sort of floor is that they offer outstanding flame protection. The majority of kinds of floor can easily sustain fire and various other types require specific fireproof materials or procedures to ensure their resilience.
Did you understand that this sort of floor is readily available in different kinds and color schemes? You can pick from a range of epoxy choices and add them in your location. By selecting this material, you can conserve cash and time, which can guide you to greater earnings.
Apart from protecting the floor from dirt and stains, epoxy also helps in avoiding moisture buildup. This is due to the fact that the finish keeps your floor completely dry..
The epoxy coverings have the ability to attract moisture far from the surface area. At the same time, dust and stains can not develop on the floor’s surface area anymore.
With its resilience, epoxy floor has the capability to withstand severe temperatures. Indeed, its resilience permits the floor to withstand severe heat and cold for a long period of time..
If you are preparing to put on this product to a commercial warehouse, you are ensured that it would endure for many years.
There are lots of other advantages of employing epoxy in your industrial facility or warehouse. Besides being able to avoid moisture buildup, the epoxy floor would also have the ability to raise its lifespan..
The more time the epoxy floor stays shielded, the much better it would function in helping keep your warehouse tidy.
WHAT ARE THE DIFFERENT KINDS OF EPOXY FLOOR SURFACE COVERINGS?
Epoxy Mortar Floors:
This epoxy floor is made up of 100% solid epoxies, graded and/or quartz sand. Mortar systems have the ability to manage a great deal of impact on the finish The advantages of using this type of epoxy floor is to help repair cracks before applying another type of epoxy floor.
Spaces to utilize epoxy mortar floorings: storage facilities, more industrial kitchens, dining establishment environments, garages, and some manufacturing structures.
Self-Leveling Epoxy Floor Surfaces:
This type is used to apply over brand-new, old, cracked, or damaged concrete floor surfaces. It helps with creating a resilient, leveled texture and sleek floor. These type of epoxy floor surfaces can be found in several color options that work extremely well in commercial, industrial, and domestic areas.
Ideal areas to utilize self-leveling epoxy floor coverings: storage facilities, huge showrooms, industrial garages, athletic facilities, and in kitchens also.
Quartz-Filled Epoxy Flooring:
Quartz epoxy floor covering is a combination of a high-performance epoxy polymer resin and colored quartz particles. Lots of industrial and property managers utilize this type of floor for ornamental areas that require sanitary and slip-resistant characteristics.
Common areas to utilize quartz-filled epoxy floorings: bathrooms, schools, locker rooms, lunchrooms, foyers, and some showrooms.
Anti-Static Epoxy Covering (Electro-Static Charge Resistant Floors):
These type of epoxy floor surfaces help reduce any static dangers in any kind of job areas. This is exceptionally essential in areas and spaces which contain flammable components.
The very best locations to utilize anti-static epoxy floorings: any type of areas that utilize flammable gases or liquids, health care structures, electronic, and chemical facilities.
Epoxy Flake Floors:
This type of epoxy floor includes colored flake materials. We insert them in the epoxy to create a dynamic look. The flakes produce a safe surrounding by helping in reducing any slips and falls.
Our epoxy flake floor coverings can be found in a huge range of dimensions, colors, styles, and textures. Our specialists can aid with customizing any size area you own.
Ideal ideas to utilize epoxy flake floorings: sports plex buildings, medical clinics, garages, and locker rooms.